• Your shopping cart is empty!

Hamer-Pack - BPC23

BPC23 
Automatic line for manufacturing of blister packages either sealed against flat film or cardboard. It is designed to be an entry level in automatic form, fill and sealing lines being the right choice for anyone dealing with short and medium runs of blister packages of any kind.



Operation

All machines in the BPC series integrate all operations needed to manufacture a blister package, as forming of the blister, loading of the product and sealing and trimming operations.

Plastic film is fed from a roll into a set of indexing chains that pierce the film and transport it through a contact heater for heating to forming temperature. The heated sheet then indexes into a forming station where parts are formed by vacuum. The loading area allows the manual feeding of the products and the paper insert (if needed). Once products are already placed inside the firmed blisters, sheet moves into a sealing station where the complete working area is sealed against a plain film or a cardboard. Finally, sheet moves into a die-press mounted immediately after the sealing press where individual blisters are punched out.

All relevant operational parameters are controlled via a touch-screen and saved inside the built-in PLC.

Features
  • Sturdy construction, designed from scratch.
  • Low cost operation, extremely low mechanical maintenance.
  • Quick tool set change-over.
  • PLC operated, touch-screen controlled.
  • EU safety rules compliance.
Technical specifications

Forming film roll diameter (max.)400 mm
Forming film thickness (max.)0,5 mm
Forming film width (max.)350 mm
Forming film width (min.)180 mm
Forming area (max.)310 x 210 mm
Forming area (min.)150 x 100 mm
Forming depth below film line (max.)60 mm
Vacuum pump flow21 m3/h
Heating power4.8 kW
Sealing film roll diameter (max.)300 mm
Sealing film thickness (max.)0,15 mm
Loading area length1000 mm
Loading area height950 mm
Sealing force950 Kg
Die-cutting force10.000 Kg
Cycle speed (dry conditions)12 cycles/min
Total installed power13 kW
Total air consumption (at 12 cycles)34 m3/h
Power supply400V + T + N, 50 Hz

Dimensions

Height1.500 mm
Width880 mm
Length5.500 mm
Estimated Weight1.400 Kg

Optional elements
  • Heating plate to heat steel-rule die cutter
  • Automatic card feeder
  • Product Code: BPC23
  • Availability: In Stock